1 / 1
mBot NEO Top Hat — image 1

mBot NEO Top Hat

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple Top Hat for the mBot NEO.

Rating
5 / 5
Likes
4
Downloads
112
Makes
0
Views
786
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Three pieces required as couldn't get supports to work.  Simply glue the pieces together to complete.   Fit's mBot NEO pattern on top of controller.  

I printed the top hat topper with 50% infill and that was overkill. 20% would work much better. So time and material estimates are again overkill.  

Top Hat connector pattern and diameter for the mBot is a little undersized at 0.17" dia.  Should be 0.18" dia.  My mBot interface holes are inconsistent at 0.19" to 0.20" diameter and my printer is dimensionally off by +0.007" at this size.  So scale or adjust as needed.

 

Tags