iMow 632 wheel clamping washer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This 3D model is a replacement part for the wheel cap retainer (clamping washer / starlock washer) for the STIHL / Vikin
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This 3D model is a replacement part for the wheel cap retainer (clamping washer / starlock washer) for the STIHL / Viking iMow 632 robotic lawn mower series.
The original part often breaks or gets lost when removing the wheels. Without this bracket, the outer wheel cap cannot be attached to the axle. Instead of buying expensive replacement sets, you can just print this retaining washer yourself! It securely holds the cap in place.
Print Settings & Recommendations: Since the mower operates outdoors and the part needs to hold tension to stay on the axle, material choice is critical.
Material: PETG, ASA, or ABS (Do not use PLA, it will deform in the sun and is too brittle!)
Layer Height: 0.16 mm or 0.20 mm
Perimeters (Walls): 4 to 5 for maximum strength of the clamping mechanism
Infill: 50% to 100% (Solid)
Supports: None required, print flat on the build plate.