Hjalpa Adapter & Guide for Use with Metod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Complete Adapter & Guide for Using Hjalpa Hinges with Metod Cabinets and Doors
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
I designed these screw adapters and drill guides after I (mistakenly) brought Hjalpa hinges for method cabinets and doors. Unfortunately, Hjalpa and Metod do not combine.
Tools:
Drill
3-3.5mm drill bit
Hammer (optional)
Pencil
Screwdriver for normal hinge assembly
Instructions:
Place the screw adapter in the small holes of the doors (2 per hinge).
Place the Drill guide on the edge of the inside of the cabinets
Slide to the top, mark and drill the holes (3mm/3.5mm Diameter x 12mm deep).
Slide to the bottom, mark and drill the holes (3mm/3.5mm Diameter x 12mm deep).
For door with more than 2 hinges:
Use the Center Finding Disk to measure the distance from the middle hinge center to the bottom of the door.
Add 1 mm.
Mark this distance on the inside edge of the cabinet. Measure from the underside of the bottom panel.
Alight with the diamond hole in the drill guide and mark the holes.
Drill as before.
Mount the doors