1 / 10
Modular 10" and 19" Rack Mount for 5 Port Switches, Netgear, Mercusys, TP-Link, Omada, OC200 — image 1
1 / 10

Modular 10" and 19" Rack Mount for 5 Port Switches, Netgear, Mercusys, TP-Link, Omada, OC200

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I wanted a space efficient mounting system for the standard housing for 5 Port switches, which is used for a lot of…

Rating
0 / 5
Likes
0
Downloads
31
Makes
0
Views
361
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted a space efficient mounting system for the standard housing for 5 Port switches, which is used for a lot of switches by Netgear, Mercusys, TP-Link including Omada even the Omada Controllers OC200 and OC220 sitting in this form factor. So I figured, that it should be possible to fit 4 of them in 1U 19" Rack unit. I designed it modular and fits in 19" or 10" racks. For 19": Print 2x the "Rand" (edge part) and 2x the "Mitte" (middle part) For 10": Just print 2x the "Rand" (edge part) The parts are screwed together with M3 x 10mm countersunk screws and M3 nuts ( https://www.amazon.de/dp/B0FVXKY2CD ) in the recess in the next part module. If the your printers tolerance isn't the best, then just heat up the nut with a lighter or s.th. and it melts easily into the recess, where it meant to be. For full assembly just rotate the 2nd "Rand" (edge part) 180° on the other end and you are good to go. Have fun.

UPDATE 25.06.2026
Re uploaded the Files in newer FreeCAD version for broader compatibility. 3D Models are technically the same.

UPDATE 25.08.2026

Added Omada_5Port_Switch_Rand_Breit-v2.2.stl File with 5mm broader rackmount ears, to fit racks, which are a few mils broader due to rack assembly tolerances.

Tags