248 models
10in rack mount for the Netgear GS-108 8port gigabit ethernet switch. Based on the 10inch_TP-Link_SG108.stl by https://www.printables.com/@mariusbach_1431080 since the TPLink SG108 is roughly the same size as the Netgear Switch. Printed…
3D printed rackmount enclosure for the GS308EP (should also work for GS308EPP model)
A wall mount for the Nighthawk M6 Pro. Has a cutout so you can plug in power, Ethernet and antenna connections. Print with the back facing towards the build plate and with supports. For supports that are painless to remove, use these…
This is a 10" rack mount for a Netgear ProSafe GS108Ev3 network switch. This model assumes you have the 4 round stock rubber feet under the switch. Printed in PLA with a 0.4mm nozzle using 0.2mm SPEED preset with adaptive cubic infill.…
The switch can be mounted under a table, on the wall or wherever you can fit 2 screws in it If you are looking for the same holder for the 8 port switch: https://www.thingiverse.com/thing:3278568 Print instructions Category: Computer…
A pair of brackets to mount a Netgear GS110TP POE-switch into a 10"-rack. As the switch is a little wider than the mountig rails in a 10-inch-rack, the switch is actually mounted behind the rails with a little gap to accomodate the cage…
I didn't want to spend $40USD per mount for the netgear wall brackets so I made my own. I printed in prusament PETG with a .6mm nozzle using draft fast settings in prusa slicer. They are beefy as the routers/satelites are quite heavy. YOU…
A 10" Rack Mount for the NETGEAR GS308E Managed Switch . Features The sides include a honeycomb structure for better airflow. Two small screws can be mounted on the floor part which will hold GS308E in place. Printing The print takes a…
Switch dimensions: 94mm width 26mm height without the feet mounting holes: 6.5mm diameter 35mm center distance
I had three Netgear gigabit switches (GS105, GS108, GS116) sitting on Rack shelves. I wanted to move them off the shelves and add them to a standard 19" server rack. 1. Non-printed Parts Required (4) Server rack Cage nuts (4) M6 x 14mm…
For mounting a Netgear Nighthawk M1 on the wall. Update 2023-03-02: Version 2 has some nicer fillets and don't hide the feet that can be removed to access the connections for the external antennas
This is rack mount tabs for a Netgear GS316 series switch. The rear bracket uses M3 screws to replace the existing screws in the back of the switch.
I needed to rework and mount as much of my networking gear as i could which necessitated removing the modem's stand and constructing a wall mounted solution. The most important goal for me was to make the simplest print i could while not…
Great for most NETGEAR switches, 5 port, 8 port and 16 port… Not tried anything bigger. Probably works with other brands too.
Wall mount (invisible screws) for Netgear Switch GS308T
10" rack mount for Netgear ProSAFE Gigabit switch GS108 (maybe others). It has one kestone slot on each side of the switch. Designed to fit my 10" 2020 rack. When inserthing the switch the sides will need to flex out a bit in the rear,…
This is a case for the Netgear Nighthawk M1, M5 and M6 that can be placed on a table or mounted on a wall. To mount it on the wall, a wall bracket is attached and the case with the device is slid into it. This allows the device to be…
Brackets for mounting a Netgear GS108 switch to the Multiboard mounting system. You will need to print 4xHandsOnKatie_Standard-Underware-Connector from the original remix file library.
This is an Easy to Print Small Holder for the Netgear GS105 Lan Switch I was Searching for a Similar Model in the Web but didn't Find anything (maybe I searched not good enough) well whatever, I decided to just make my own, the Result You…
Hello together, I needed a fixation bracket to mount my netgear switch under my printer enclosure. Happy printing :)
Originally model was prepared for GS305EP switch, but considering size of other GS equipment, it should accommodate most of them. Model has tolerances, so switch does not have to be forced into it. End plate requires M2 screws, holes are…
Über den Parameter “Spalt” kann der Freiraum für den Switch verändert werden. In der ersten Veröffentlichten Version stand er auf 0,2 mm, jetzt ist er 0,5 mm und liefert etwas mehr Freiraum.
This bracket holds a Netgear GS308 Ethernet switch to the underside of a shelf. Uses four wood screws to attach. Print instructions I used PETG. PLA would probably work too. Print settings are not critical -- it didn't need support or…
Mountingbracket for Netgear switch GS305 or GS308 with a height of 29mm
Sollte der Router zu eng in der Halterung sitzen ändern Sie den Parameter “Spalt”. Zur Zeit steht er auf 0,3 mm. Mit 0,4 oder 0,5 sollte der Router leicht in die Halterung ein- und ausführbar sein. Meine Halterung ist im Wohnmobil…
Requirements: M4 x 10 screw * 2 M4 Threaded insert * 2 (optional)
Needed a way to mount two GS308E Netgear switches onto a wall on top of each other to conserve space so designed these wall mounts that fit around the switches. I have left room below the switches to pass cables, and left gaps between the…
This is a remix of the design https://www.thingiverse.com/thing:1322695 . For a smoother fit I made it 1mm bigger in the inside and added a honeycomb pattern to it. The switch can be mounted under a table, on the wall or wherever you can…
I liked Rehtori's Netgear Orbi Wall Stand, but wanted mine a little smaller and closer to the wall. I made an open grid on the bottom to maintain ventilation. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament:…
I found various examples of mounts for this switch but all were bulky, used a ton of filament, or didn't use the factory mounting holes. I had one of the original metal ears that came with the switch and used it to model these. The result…
10" server rack for Netgear GS305 5 port switch. Pretty simple design, I printed face down using mouse ears.
A simple bracket for the Netgear GS108E . It has small holes so you can see the power LED and retain access to the factory reset button. It fits very snugly and you'll have to relocate the rubber pads slightly (or you can remove them…
Allows you to fix and hide a network switch under the desktop or a shelf. This one has been designed for a Netgear GS108 switch but it should work with other netgear devices with same dimensions. Printed with 0.6 nozzle with orange…
i made a rack mount for my cm1000 modem, it mounts right now with zip ties in my case but you could probably stick it on with vhb tape as well. i just made it simple and didn't want it to be complicated with multiple parts. also the…
I needed a decent wall mount for a Netgear Orbi so came up with this. Printed in Prusament Signal White PET-G it holds the router nicely and there is room at the back to feed the cables through the slot in the base. Print Settings…
This is a remix of the design https://www.thingiverse.com/thing:1322695 . I seperated the model and added some support, so you can print it also on smaller printers and you are more flexible to mount. You have to mirror the parts in your…
10in rack mount for the Netgear GS-108 8port gigabit ethernet switch. Based on the design from @BrianBerkley. Printed face down, 2 versions are available to be used with/without M3 metallic threaded inserts. 2 screws M3x10 are required…
Support to be able to hang Netgear Switch 8 port Unmanaged Gs308 stand. Print height 0.2 also it is recommended to add custom print supports for the hooks behind.
Mount for the Netgear MR1100
This is a rack mount kit for the Netgear GS108 switch designed for a 10-inch rack. The kit comprises three parts that can be 3D printed without the need of support. The clamps must be secured to the main part using two small screws. I…
Dear makers, we would like to share our DIN holder for switch NETGEAR or MikroTik Routers.GS308E. Consist of left and right holder. Overall depth ater installation is 81mm from DIN rail. Compatibility: NETGEAR (26 mm thickness): GS308E…
I had three Netgear gigabit switches (GS105, GS108, GS116) sitting on Rack shelves. I wanted to move them off the shelves and add them to a standard 19" server rack. 1. Non-printed Parts Required (4) Server rack Cage nuts (4) M6 x 14mm…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
It was designed to attach to the underside of a desk. There are lugs that fit the bottom screw holes of the switch. It also has hooks to clip in the cables to keep it somewhat tidy. If you have a 200x200 build plate like me then rotate it…
You can fix it with double adhesive face or 2 screws Printer settings : Material : PLA Infill : 20% Support : no
It's a DIN-rail mount for th GS305v3 from Netgear
The Netgear MR 1100 hotspot gets hot very easily, and shuts down. This Cooling case is designed to keep it cool even when under heavy load. A small 40mm noctua fan is attached to the bottom of the case and is powered by the USB A output…
The print in the picture was a misprint, but it still worked, so I kept it.
Wanted to mount this guy to a board, did not like the goofy stand it came with. This would possibly work with other versions of this model.
I had three Netgear gigabit switches (GS105, GS108, GS116) sitting on Rack shelves. I wanted to move them off the shelves and add them to a standard 19" server rack. 1. Non-printed Parts Required (4) Server rack Cage nuts (4) M6 x 14mm…
This mount has especially been made for the NETGEAR Nighthawk M6 Pro (MR6450) Router. Just mount it to any vertical surface and let the router slide in from above. It has a double rear wall with ventilation holes for thermal convection.…
I wanted to move my switch off of the shelf to make it easier to access, so I designed an under shelf mount. It prints fine without supports if you print it with the back downwards. I've included CAD files if you want to remix it.
This item is a small wall mount for the Netgear gs105 LAN switch. It is designed for the using of tesa powerstrips for the wall montage. It can be used for vertical and horizontal mount. Print Settings Rafts: No Supports: No Resolution:…
Got my Netgear CM2000 Cable Modem, and for some reason it seems Netgear wanted it to look "sexy", which means it has a bunch of weird angles, and takes up a bunch of unnecessary space. I found a mount (…
Since the wall mounts I found with a quick search didn't really appeal to me, I developed my own version. The wall mount consists of 2 parts that are screwed by means of M3 screws and threaded inserts. The switch is tightly enclosed by…
I found that most 3D printing 19 inch server rack holder designs for Netgear GS316EPP and GS316EP 16 Port Switches were either too large for my heated bed (23.5 x 23.5cm) or had too much unused space . So I decided to make one of my own,…
Remix from 6 inch rack to 10 inch rack
Here is the STL and the Fusion file incase you need to make any modifications to it. I printed in PLA at 20% infill. The screw holes on the side of the switch are M3. I used 8 total M3x8 screws and 4 #6 wood screws to mount to the bench.…
The pegs can be used to adapt the 40mm spacing to the 45mm of a Netgear GS105, or any other device with that pattern. In “reverse” order, the pegs can provide a 35mm width pattern. The holes are 3.5mm to be tapped M4 and the tolerances…
This is a wall mount bracket for the Netgear Nighthawk M5 (M5100/M5200) I could only find M1 and M2 brackets and none were suitable for my needs. Designed this in Tinkercad. M5 slips in the back into the pocket, then the rear spacer slips…
Simple vertical stand for a Netgear Network Switch.
Here is a print that will fit diagonally on a Creality K1c. I printed it in PETG This design will mount an 8 port Netgear switch in a 10" mini rack for my raspberry Pi's. There are ventilation holes which also aid in reducing the amount…
Rack mount ears for Netgear GS108E switch. Remember to hold switch while pluging cables to prevent it from moving to the back. I've added a hole on each ear for the switch feets. Inspired by: https://www.thingiverse.com/thing:249851 Print…
Downloaded a mount and hated the print so I designed my own. Fits like a glove. If your printer isn't finely tuned, I'd probably experiment with 101-102% scale printing. I just printed it at 2 shells and 10% infill using Prusament PLA…
You need: 1 of each of the 4 models 4x M3 heat set inserts 4x short M3 countersunk screws 4x countersunk screws for your preferred wall mount solution Print the outside brackets with the outside on the build plate, so no support is…
About this model: This has been modeled for the Netgear Nighthawk M6 (MR6110) It is a simple snap fit outer case, made from PLA, PETG, or whatever filament you like. There is an inner “sleeve” designed for TPU. I mimicked basic phone case…
Theres the STL and the Ondsel file, i printed it at 100% and it worked ok, Only change i made after print was add a 1mm fillet on the recepticle to make it stronger but its manly aesthetic. Use a Brim, the side where there is no holes…
This is 19" 1U rack mount bracket for a Netgear 8-port Network Switch (GS308PP). It's pretty beefy because it will be in a portable case and need to stand up to a lot of rough handling. I printed this with PLA on a Bambu Labs A1 Mini, so…
Some Rack Ears for the Netgear GS110EMX Network Switch to mount in a 10“ Rack. Two Variant are available to mount. The normal 1U Variant and the weird 0.5U Version. In my Case it worked perfectly but it may not in yours… I would suggest…
Uses Leviton push pegs to mount in the box, then slide your switch on the pegs. Pegs are 80mm on center, with 6mm posts
Beware this is only the right side of the modular rack model. Make sure you know this before printing. Use supports (organic is better)
An improved mount that prints in one piece and will securely contain a Netgear GS308E switch. Uses set screws. Will continue to add parts and pictures as I build my rack. Print face down with supports enabled. Four m3 screws are required,…
Not much to say about this Thing :-) It's dead easy to print, use 4 Wall_Layers, infill 20%, no support if printed rear side to plate. As always: I added Autodesk Fusion file + Step - modify as you like. Print Settings Printer Brand:…
I love my Netgear Orbi setup (powerfull router + satellite), but was a bit disapointed that it was so difficult to put in a wall. I have built rj-45 sockets high in the wall for a good router placement, so hanging it into the wall was a…
I prefer to keep my switches off the shelves and add them to a standard 19" server rack instead. I recently picked up this GS305P and adapted a rackmount adapter for it. 1. Non-printed Parts Required (4) Server rack Cage nuts (4) M6 x…
Small single-sided 1U mount for a Netgear GS105E switch, suitable for a 10" rack. The switch measures 10.1 x 9.4 x 2.6 cm. Also fits other switches of the same size.
I'd printed out one of Masiakla's rack mounts to use with a GS308v3 switch, but as I was considering the way I'd use it in my own setup, I realized I wanted to have at least one keystone connector to run a cable through behind the rack.…
A 6-inch rack mount for the Netgear GS105 and similar sized switches/hubs (94mm wide x 100mm deep x 26mm tall + 3mm feet) Inspired by and compatible with Mauker's series of 6-inch rack accessories and madmax890's models for the series.…
10" Rack Netgear GS110EMX mount
Glue or double-sided tape is needed for sticking it under your desktop . Could be printed in PLA without support. Update : I uploaded a new model with a C clamp for a mount without tape or glue. The clamp have an height of 80mm. If you…
If your 10-inch network cabinet is full to bursting with technology, this holder will save you some ⅓ U space. It can be supplemented with 4 M3 inserts on the sides so that you can additionally fix the switch to the side with M3 10mm…
A simple system of hooks to hang a Netgear GS108 switch ( https://www.netgear.com/be/business/wired/switches/unmanaged/gs108/ ) on an Ikea Skadis pegboard ( https://www.ikea.com/be/en/p/skadis-pegboard-black-50534378/ ).
The model provides a screw-in wall mount bracket for your NETGEAR GS308 switch. Printing details: Supports are required for the bottom lip of the bracket Print at 0.2mm Use PETG for flexibility
I wanted to mount my LM1200 LTE modem on the wall, but I hate the keyholes it has on the back. They're too small and require small screws. Instead, I made a quick model. This has two holes for screw mounting (and clearance between the…
If you like the model, I would appreciate if you leave a ❤ like. Rack Mount Bracket for Netgear GS108 This bracket is designed specifically for the Netgear GS108 switch, offering a clean and secure fit in your 10-inch rack setup. Features…
printed in 0,2mm PET with supports on.
I made this case from scratch for my Netgear Nighthawk M6 Pro to protect it from the hazards of baseball games. It has served me well and has survived several falls and drops. Lid secures with several very small screws.
Holder to mount NetGear GS316 Switch in 19" rack. Print 2, one for each side. For ekstra security, add a large zip tie to hold the ears to the switch while mounting it to the rack, once it's mounted it should hold it self. print with the…
Wall mount for the SX10 10-port multigigabit Nighthawk gaming switch - because Netgear were too preoccupied adding LEDs and as many angles and as possible to this thing, they forgot to add a couple wall mount holes in the bottom, like…
Remixed Maukers great model to accomodate a NETGEAR GS305P switch. Printing in ABS works well if you include an inner and outer brim. Added both versions (left and right). Remove the rubber before insert the switch into the mount.
I'm sure other HDHomeRuns could also be used if the dimmensions of them havenet changed but it was designed around the Connect Quatro that I have. The vertical stand has to be removed from the Netgear CM1200 and the modem helps keep the…
SMC bracket for mounting [Netgear MS305/MS308 Multi-Gigabit 2.5 GbE switches into common Structured Media Cabinets. Supported devices include: Netgear MS305 5-port 2.5 GbE switch Netgear MS308 8-port 2.5 GbE switch This includes printed…
A simple wall mount for the MK62 Nighthawk Mesh router from Netgear. Rather than having to have my meshes sitting on the floor or find surfaces to set them on, I opted to mount my mesh router satellites on my house's walls. You'll need 2x…
A remix shortening the length to fit a Netgear GS305 5 port switch. I also hacked off the bottom curve to allow it to print with no supports
Use this to attach to a wall or to generic DIN rail mounts (available on Amzon, eBay, AliExpress etc) Has access hole for DIN rail clip release. Integral spacers keep upright when DIN rail mounted and spaced away from the wall when wall…
10" Rack Shelf for Netgear GS108T & Wemos S2 Mini Relay Board. Relay board space can be fill with an empty shelf.
Wall mount for NETGEAR Nighthawk X6 R8000 WiFi router
Switch rabbit ears for the NETGEAR ProSafe JGS516. Tinkercad: https://www.tinkercad.com/things/7WEcJiZAvKk Category: Computer
Switch ears for NETGEAR ProSAFE 16-Port Gigabit Ethernet Switch (GS116NA) Attaching one with M3 screw holes and M5 screw holes. Category: 3D Printing
netgear gs105 mount print on its side
![Netgear Switch Wall-Mount [GS308, S350 Series]](https://media.printables.com/media/prints/460635/images/3783683_5042795b-299b-464b-890b-50ccf43c28fc/img_20230423_134931.jpg)
