Netgear Orbi 970 Series (WiFi 7) Router/Satellite) Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mounts with cable pass-through and cable channels for Orbi 970 routers and satellites.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 451
- Makes
- 2
- Views
- 1,693
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I didn't want to spend $40USD per mount for the netgear wall brackets so I made my own. I printed in prusament PETG with a .6mm nozzle using draft fast settings in prusa slicer. They are beefy as the routers/satelites are quite heavy.
YOU MUST USE 2 M4x16mm screws through the bracket into the router mounting holes. Please do not skip this.
Back screw holes can be widened as needed with a drill or just screwing through it.
Channels in on the bottom and back can be used to pass other cables through.
I have only tested this with PETG.
Print with support on build surface only.
06-18-2024 added 10cm longer version for better cable clearance with some routers. This makes it compatible with the RS700S
Works with:
BE27000 system routers
RBE973S(B)
RBE971 router
RBE970 Satellite
RS700S (+10mm version)
