Skadis 40mm to 45mm width adaptor (e.g. for Netgear GS105)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pegs to mount 45mm Netgear GS105 hole pattern on 40mm Skadis pattern.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 126
- Makes
- 1
- Views
- 570
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
The pegs can be used to adapt the 40mm spacing to the 45mm of a Netgear GS105, or any other device with that pattern. In “reverse” order, the pegs can provide a 35mm width pattern.
The holes are 3.5mm to be tapped M4 and the tolerances should be a nice tight fit. The STEP files should allow you to customize it for different screw sizes
Instructions:
Print 2 pieces of the model, with one being mirrored
Tap the holes (or use a heat set insert if you prefer and modified the hole diameter)
Insert the screws almost completely (I chose button head M4x5) and test fit on your device
Mount the pegs to the pegboard and then slide on the device
In the files section I also provided my peg template as STEP file.