Netgear Nighthawk Switch Wall Mount GS810EMX
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount for the SX10 10-port multigigabit Nighthawk gaming switch. No supports.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 71
- Makes
- 0
- Views
- 500
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall mount for the SX10 10-port multigigabit Nighthawk gaming switch - because Netgear were too preoccupied adding LEDs and as many angles and as possible to this thing, they forgot to add a couple wall mount holes in the bottom, like every other switch...
The switch is fully supported and can easily be removed; it simply slots in and out via the top. The tabs either side at the top keep it firmly in place and prevent it from falling forwards if accidentally knocked. There is complete access to all ports, power connector and LED button.
This heavy boi also gets quite warm, so don't skimp on the perimeters and infill. I've printed with 4 perimeters in PLA+, which is holding up well after a year.
2 versions available - full model and 2-part models for smaller print beds. Screw holes are 3.5mm. No supports needed!