1 / 3
Netgear Switch Wall-Mount [GS308, S350 Series]
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact wall mount for an 8-port Netgear switch with the ports facing up and a neat way to manage the cables.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 115
- Makes
- 1
- Views
- 1,463
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
You need:
- 1 of each of the 4 models
- 4x M3 heat set inserts
- 4x short M3 countersunk screws
- 4x countersunk screws for your preferred wall mount solution
Print the outside brackets with the outside on the build plate, so no support is needed!
Insert the switch from the bottom and mark the position (or use a hole spacing of roughly 135mm left-to-right).
When fixed to the wall, optionally run your cables behind (nearly 12mm gap), again insert the switch from the bottom, and secure it with the bottom brackets (non-rounded side facing the wall) and M3 screws.