50 mL Centrifuge Tube Horizontal Shaker Clamp remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use to mount two 50mL tubes horizontally on orbital shakers.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Chemistry & Biology
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A clamp to mount 50 mL tubes to an orbital shaker. The tube fits snugly in the bottom clamp, the cap sinks into a divot so the rim is prevented from moving while the shaker is in motion. The top clamp clips around the back of the bottom clamp. The horizontal support keeps the tubes level during shaking. Both the bottom clamp and horizontal support screw into the shaker platform with a #10 screw.
Printing Directions
Printed in PETG, which is resistant to a lot of chemicals. Print all pieces upright, the top clamp will need supports on the curved portion, but I found some roughness there is better than on the clips (if it were to be printed like in the original)
For Use
Screw bottom clamp and horizontal support into orbital shaker, then slot in the 50mL tubes. Clip the top clamp in place and turn on the machine.
