MRC THUNDER KING WHEELS - Two versions
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Full set of replacement wheels for the 1990's MRC Thunder King RC Truck.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 11
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here are my replacement wheels for the MRC Thunder King. They come in two types; solid like the original and one with holes. These wheels are 3.2" Diameter and 2.3" Wide. They will fit the original tires as well as Traxxas Tmaxx tires, among others. There is both a FRONT (Round Bearings) and a REAR (Hex 12mm) version for each type.
These parts are designed with tolerances for PETG. You may have success with PLA but I Have not tested the parts for PLA.
MY REAR BUMPER WALL MOUNT TK/DT/BK
-
I have included the .3MF files. Each wheel has thick top and bottom layers as well as perimeters, I do not suggest changing this as its intended for strength and proper size for through holes.
The post cleanup of so many supports looks much worse than it is, I cleaned all four in about 20 min with a flat head screwdriver and some pliers. Just be careful not to brace your pry tool against the inside rim edge and crack it.
Don't forget to glue the rears!
-
Filament: CCTREE PETG Galaxy Silver
Printed On: MK3S+ (probably prints faster on a newer machine)
Print Bed: Textured Powder Coat Steel Sheet
Bed Temp: 90c
Nozzle: 0.4mm
Nozzle Temp: 250c
Layers: .030mm (.007in)
Infill: 30% Rectilinear
Perimeters: 10
Solid Layers Top: 5
Solid Layers Bottom: 5
Supports: I use these settings from BOBSTRO on the Prusa Forums and they work well for me, on both PLA and PETG.
Style: Snug/Organic
Top Contact Z Distance: 0.25mm
Pattern: Rectilinear
Pattern Spacing: 3mm
Top Interface Layers: 4
Interface Pattern: Rectilinear
Interface Pattern Spacing: 0.2 mm
XY Separation: 75%