Counting matching models…
found my old thunderbolt files! the pole is 15mm dowel rod. Motor for the chopper is a n20 motor without gearbox this https://www.amazon.com/Acxico-6V-12V-Speed-10mm12mm-Electric/dp/B097M8PC53 just with a long shaft or any small motor…
A Living Thunderclap. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Toys & Games
Since “that one cat” removed the Dummy Thick leg set from the site, I've used the backup of the files I have to recreate them, smoother, with better finish, and fit for the new 1.0 update. Since A LOT of people asked me for the old files,…
takes 1/2 in rod for stability. split for smaller printers. fyi this will take a decent amount of filament. Category: Costume
Can be printed with any material. Upper mount separated for simpler printing process with less supports. Mount ring ment to be glued to the top.
READ BEFORE ATTEMPTING TO MAKE!!! I am no Edaan, Nascarsimracing1, or Connor Cruz and my designs are not the most professional!! This means certain parts of the model are not designed perfectly. This mainly includes the connection between…
Print Settings Global Settings Wall loops: 2 Layer Height: 0.2mm Infill: 3% Keep the print light since all the weight can end up on specific points Sparse infill pattern: Gyroid No particular reason. You can change this if you want.…
Need to be tested with sleeved cards. Start by printing a little faction box and a big faction box, and maybe a card holder. Should be good, but I never tested it. I've added 2 faction box lids for sleeved cards wich are very high…
Die Halterung passt sowohl beim E36 als auch beim Thunderbunny der Kraemo Modelle.
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP Radiant and full of life, this low-poly dragon embodies…
Found this great WD19dc dock but my thunderbolt input was covered. Added a cutout for it.
Compatible with https://www.printables.com/model/120393-chain-links hex link
Initially made for model WD22TB4. May fit other models. Would consider altering size upon request. The docking station and power cord need to be placed in the bracket prior to mounting. Most ports should be accessible after mounting.…
FROM MY END, SUPPORT FOR THIS HAS ENDED. THIS IS VERY BAD IN MANY WAYS, AND I HAVE CANCELLED SUPPORT AND MOVED ONTO REMODELING ENTIRELY. YOU CAN ATTEMPT THIS, BUT YOU WILL DEFINATELY HAVE TO MODIFY MANY THINGS YOURSELF. I am only keeping…
Bring the ruler of olympus to your collection with this zeus figurine, posed as the commanding skyfather. Designed as a strong, readable statue silhouette for display, dioramas, and myth-themed sets. Ideal for fantasy collectors, tabletop…
Command the skies with this imposing Storm Giant Thunder Warlord , a celestial titan sculpted with raw elemental authority. Clad in heavy armour and gripping a lightning-forged spear, this giant stands atop rolling storm clouds, ready to…
This model represents the Norse god of thunder inspired by ancient Scandinavian mythology. Designed in a dramatic stone bas-relief style, the sculpture captures the raw strength and elemental power associated with the legendary…
Majestic Olympian god holding a lightning bolt in a powerful classical pose.
This washer is designed for the Valerion ThunderBeat Speaker to correct its crooked mounting. When I wall-mounted the center speaker using the included mounts, it tilted downward because the mount was too loose to hold it level. I created…
A Living Thunderclap. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Toys & Games
Uses two parts with clips that slide into each other. One part goes on the dock and utilizes the two M4 mounting holes. The other part is screwed into the desk and uses any small wood/sheet screw (I use 2.5x10 screws). Printing Both parts…
This Thunder Chief Bust portrays a powerful tribal leader believed to command the power of storms. Wearing an impressive feathered headdress and ceremonial armour carved with symbolic markings, the chief stands as both warrior and…
Seamless Multi-Part Design: This hammer was sliced along natural seam lines where possible and design to fit together using interlocking pins and geometry. Where seams are unavoidable, their placement reduces the visible seam profile and…
This is basically a port of the Thunder Thighs kit for the new Carbon 13 figure, with some cyberpunk styling added to my personal build As per requests on the older kits, this one includes pretty much all the parts, so you don't have to…
Thundercats logo with an actual solid color background after only finding the actual lion head part of the logo missing the red circle background.
I really loved the presence tokens by BlueChromis , but after working on another project and seeing two color prints, I thought that two color tokens would look nice. This is a remix of BlueChromis's Thunderspeaker token, raised instead…
This is my rendition of the Power Rangers Dino Thunder ( Bakuryū Sentai Abaranger ) Rex , Tricera , and Ptera Morphers for the Red Ranger ( Aba-Red ), Blue Ranger ( Aba-Blue ) and Yellow Ranger ( Aba Yellow ) All parts have been color…
Colors: Baseplate: Color of your choice (no Black or Red / recommend something neutral like white or gray Black : For the Plane Red : For the stuff around the plane (top layers) Discord: https://discord.gg/nJvfCKD2jx a community Server to…
PARTS LIST: Motor: https://www.amazon.com/dp/B0BB2V8PNK Hardware Kit #2: https://www.amazon.com/AvrestYPT-Stainless-Assortment-Phillips-Electronics/dp/B0F8V7G8T8/ref Hardware Kit #3…
found my old thunderbolt files! the pole is 15mm dowel rod. Motor for the chopper is a n20 motor without gearbox this https://www.amazon.com/Acxico-6V-12V-Speed-10mm12mm-Electric/dp/B097M8PC53 just with a long shaft or any small motor…
These models are some alternate options for Haroldhihat's new thunderbolt model. These designs are currently untested, so any feedback is appreciated! More rotors and stators will be added in the future, so please check back in soon.
Uses two parts with clips that slide into each other. One part goes on the dock and utilizes the two M2.5 mouting holes. The other part is screwed into the desk and uses any small wood/sheet screw (I use 2.8x13 pan head screws). Printing…
Download free Chilla Lunatacs Thundercats Villains collection busts fanarts by CG Pyro STL 3d priting collectibles If you are a Thundercats lover you can't miss this collection, join my patreon and get this great character as a reward.…
Download free Jackalman Lunatacs Thundercats Villains collection busts fanarts by CG Pyro STL 3d priting collectibles If you are a Thundercats lover you can't miss this collection, join my patreon and get this great character as a reward.…
Wanted to tidy up our workspace a little, so most things got wallmounted now. The Fixture is for a Lenovo Thunderbolt 3 Dock, which is a great dock btw and can be bought refurbished for about 80€.
Limited offer: 20% Off ($60 full price at 3DLabPrint.com ) LW Planes Series – Wingspan 1.56m / 61.4in, scale 1:11 Fully 3D printable RC model of a living legend, designed in 100% clean vase mode. Fully 3D printable RC model of a living…
Designed to be attached to the tacticool spring thunder body designed by Lyza ( HERE )
Holder for a StarTech.com Mini Dual 4K Monitor Thunderbolt 3 Dock with DisplayPort + Ethernet (TB3DKM2DP) dock. This holds the dock to the side of the desk. Which gets around the problem of the stupidly short thunderbolt cable on the…
I propose you a deal of 50% profit STL 3d printing models Hello my friend, I'm celebrating, because I'm going to start a treatment that I need for a long time, a health issue, and therefore I need a lot of support to collect the money, so…
This model allows you to insert two Thunderbolt 4 (USB-C) cables which will be properly aligned so that you can connect and disconnect them both at the same time from a MacBook Pro. It essentially turns them into a single plug. I use my…
A replacement keyboard clip designed for the RedThunder K28 Keyboard, although i expect it to work with quite a few OEM chinese keyboards. Fusion 360 Files Included for editing/remixing Category: Replacement Parts
Bladed Revolver for Dummy 13 both Right and Left Hands
Its a super simple print, it will fit on the build plate of an Ender 3 so it should be fine on most printers. Just be careful when removing the nose, the propshaft is delicate.
My CAD version if Fungineers Funwheel Thunder rails had just one height. Yes is exactly recreating the Thunder rails model but without 3 heights (just the middle height), logo and the horrible middle section. And no, these are not TFL…
can be printed together the model needs to be glued together or separately in other colours the Jf-17 is very realistic Print in place kit card , Assembly required need to use a support
split for smaller printers, takes a few 1/2 in rods. about 3ft in length. Category: Props
Since “that one cat” removed the Dummy Thick leg set from the site, I've used the backup of the files I have to recreate them, smoother, with better finish, and fit for the new 1.0 update. Since A LOT of people asked me for the old files,…
plug the holes from removing the safety net so they are no sharp edges
Something fun and befitting the captain of the Star Seekers, here's a pirate hat for Thundertron! Simple and quick enough to print as single piece, this has been designed to fit just nicely and specifically on Thundertron's head. The logo…
Arrrrrr, Cap'n Thundertron needs his parrot buddy! Let's be making him one which integrates with his foot! An homage to how the original Thundertron could also mimic a pseudo parrot companion using his foot, this set pegs onto the front…
Dropping with a new version in Legacy - it's Space Pirate Thundertron! Unfortunately, he does come with a couple of hollow bits in his arms and legs, so it's time to whip up some gap fillers to fix that. As usual, these fillers should…
Model of the 9x30mm Grom cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be ligth…
This is a collection of ThunderB assets for use with airsoft and paintball games. Some of it I helped design. Some of it is from other creators in the community (Shout out to RainbowStrikes & Others for allowing public domain usage of…
This design is specifically designed for MT helmets, ive used it on my Thunder 3 for my hero 7 mounting on chin. this also includes gopro lens centering mount to adjust gopro lens in center of helmet. This design fixes that problem for…
Small prop to jazz up a Pikachu costume or be extra electric at a fancy dress party. Made in 2 part, they snap fit nicely together or you can glue them if you prefer (.6mm gap everywhere in the joint).
Goes over the ends of the OWC Thunderbolt 4 dock and fits a 36 mm pole. Attaches to the pole using two zip ties since I haven't used threaded inserts and didn't want to run the risk of stripping threads. The fit snug on both ends.
Print the stick on its side and the head upright. You may need to drill out the hole a little bit more to get it to fit. You may also have to glue it in place. thunderstick head v2.stl fits the shaft more easily, but I left the original…
This is a wall mount for a Lego brick Buck Rogers Starfighter / Thunder fighter Ship created according to the MOC 48610 design on Rebrickable created by CBSNAKE . This is similar to my Colonial Viper mount, there are two parts to this…
My Akitio Thunder 2 eGPU setup with the MSI AERO GTX1060 6GB graphics card and dual Noctua 60mm fans was still getting warm during gaming even after a little bit of case modding. I noticed the stock perforated cover on the Akitio Thunder…
Not too much to say here other than it would probably be best in ABS but I have been riding these for quite some time and PLA Pro has also worked well. I didn't use infill and I used just the standard .2 mm build height with a .4 nozzle.…
Replacement landing gear for Thundertiger Raptor 50. The originals are hard to get and why not make it yourself :-) It is a tight fit to insert the skids, I had to widen the holes with a 8 mm drill bit, but so , the skids will not fall…
My own CAD version of Fungineers Thunder rails, obviously with no logos
I create this token to put on top of any car when some of them is on fire. The game provides you a fire cardboard token to put on the table but nothing over the cars, so I give you this idea. You need to print 2 small flames and 1 big…
Days of Thunder Film / Cinema room sign, Colours can be altered to whatever you prefer through your AMS (Bambu) or through you current printers configuration. Large Measurements approx.: 22cm x 7.5cm x 2cm Medium Measurements approx.:…
Brackets to mount the HP Thunderbolt 3 Dock under the table or on the wall.
Simple case with no fasteners, I remixed "The Ultimate Box Maker" using fusion360 to not need screws to hold the case together. (Still need at least 2 to hold the board in place)…
takes 1/2 in rod for stability. split for smaller printers. fyi this will take a decent amount of filament. Category: Costume
takes 1/2 in rod for stability. split for smaller printers. fyi this will take a decent amount of filament. Category: Costume
Case for a Thunder Force AC PCB! Requires: 4 - m3 x 5.7 threaded inserts 4 - m3 x ~16mm screws I printed at 0.2mm w/ 15% infill.
Let me introduce you my Thunder Cloud led light :) This was printed in PLA 0,2 layer height on a textured PEI plate. You can insert rather a RGB or RGBIC led strip in it. Mine has a cheap rgbic strip which allows me to animate the light…
This is a riser? I don't know what it is but I do know what it does since I designed it. It is a HP G4 dock mod that will redirect your thunder bolt cable so that it comes out the back instead of the front. I really didn't like how the…
Here is the awesome looking Oklahoma City Thunder Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a commercial license to sell my prints? Join as a member to…
Often missing or damaged parts of a door handle on 1986 Ford Thunderbird. Both black piece and cover are models based on existing parts. I tried to print them in various orientations and I got the best results printing the cover with the…
This is an under desk mount for Lenovo ThinkPad Thunderbolt 3 Dock Gen 2. The mount requires 2 pairs of 3M velcro command strips to give a flush to the desk look. no support needed! I am using the large size command strip, but medium size…
Assembly: Remove all components from the printbed and detach the supports. Sandpaper may be needed on the rear edge of the tail. Connect the wings to the fuselage, using the hole for the landing gear and direction of the wingtip tanks to…
This is my rendition of the Power Rangers Dino Thunder ( Bakuryū Sentai Abaranger ) Rex Morpher for the Red Ranger ( Aba-Red ) All parts have been color separated, including an additional eye piece to print in whatever color you like to…
A simple grip that slides onto a 10-round magazine for the Bersa Thunder 380 pistol.
Alternative airgun suppressor Snowpeak/Artemis M25 Thunder Black .35 caliber . 5x baffles for 1x suppressor body.
This is a box intended for the control unit and control buttons for the thunderbolt 1003 and 3t 22 Red LED. : https://www.hadex.cz/k453f-kontrolka-12v-led-cervena-do-otvoru-10mm/ Orange LED. :…
This is a model of the Thunderbolt horn and is a sliced up version of somebody elses thunderbolt
I've been using my Apple Thunderbolt Display for years and had always planned to raise it up a bit to make the viewing angle more ergonomic. Recently I came across a model designed for a 27” iMac that suited my taste exactly.…
This is a stand for the Harbor Freight solar battery maintainer, to keep it up at an angle. I have it set at 30.5° SKU 64251 Only one file included, orient upright, and mirror to get the stand for the opposite side.
This is wall mount for the HP USB-C/A Universal Dock G2 Thunderbolt DisplayLink. See link for more details on the dock. https://www8.hp.com/h20195/v2/GetPDF.aspx/4AA7-5549ENW.pdf Printed in PETG, no supports required.
Can be printed with any material. Upper mount separated for simpler printing process with less supports. Mount ring ment to be glued to the top.
Can be printed with any material. Upper mount separated for simpler printing process with less supports. Mount ring ment to be glued to the bottom
Can be printed with any material. Print uses screws Solenoids I use :https://www.hadex.cz/g654-elektromagnet-tazny-jf-0520b-6vdc-sila-4n-zdvih-10mm/
![[NEW MODEL IN PROGRESS] Mini Federal Signal Thunderbolt (Functional) [NEW MODEL IN PROGRESS]](https://media.printables.com/media/prints/ec0ac4b5-cb04-4fee-9875-f961f9ef126a/images/12745673_affa9b69-e625-4314-b564-a7ad6a6e6af9_857d78fc-04a8-4837-94bd-40ae7cfbabba/screenshot-2026-04-22-230545.png)
![(HORNS!!) [EARLY ACCESS] New Thunderbolt Chopper Assemblies!!](https://media.printables.com/media/prints/3f4653c9-4550-43d9-b6aa-fb756891380c/images/12752842_c82c420d-1cc6-4372-83f0-147d1d76946d_2b9a421a-ef35-474e-82d9-2203fb117fe5/screenshot-2026-04-24-022112.png)
