Thunderbolt eGPU casing TH3P4G3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case for the bare-bones TH3P4G3 eGPU kit from EXP GDC.
- Rating
- 4 / 5
- Likes
- 44
- Downloads
- 698
- Makes
- 1
- Views
- 6,536
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
This was made with an SFX power supply and AMD RX5700XT in mind.
I highly recommend you use a gpu “blower” style cooler as it will be much easier to cool.
During assembly, make sure the PSU fan is facing the outside, otherwise it will not be getting enough cooling.
You need a printer that can print ~30cm high objects, a prusa mk3 is too small!
For this build you only need 4 to 5 m3 screws 1cm long or longer and one single m3 nut.
Four m3 screws to secure the endcap to the case and one to secure the gpu inside the bracket.
the model has it's own feet to stand on, and ventilation holes on both sides.