MMU3 CORE One Community Edition Ultimulti Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified mounting hardware to allow the use of an Ultimulti MMU with the MMU3 CORE One Community Edition modification.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 14
- Makes
- 0
- Views
- 395
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These are modified mounting rails that allow you to mount an Ultimulti to the MMU3 CORE One Community Edition without having to leave the control board dangling out in the open.
Printed using 0.4mm nozzle, 0.15mm layer height
Tested with PLA and Fiberology PCTG-GF, but will work with regular PETG.
I used supports for all overhangs that showed up blue in PrusaSlicer, but you might be able to get away without them.
I included the raw .sldprt files in case anyone wants to make improvements, just make sure to follow the license if you upload your modified version anywhere.
