Steampunk Bunny Engineer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bunny Engineer figurine in steampunk attire.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution
A stylized rabbit in steampunk attire holding a wrench and book. The model is composed of the rabbit model and a base. The rabbit can be printed without the base, but it's not very stable without it.
Pictures are of a print with a 0.4mm nozzle at 0.15mm layer heigh using 3 permitters and organic supports from the build plate only, 25% infill (gyroid) at 100% of model size (approx. 10cm tall.) The model will scale up or down, but the wrench handle becomes brittle the smaller you make it, and could be a problem when removing the supports. 3D Banana for scale.
Banana is from https://www.printables.com/model/515070-banana