Counting matching models…
It can hold heavy backpacks and, for no additional cost, lightweight backpacks too. Perfect for students who have bags full of heavy books. For best results, print in PETG with 15% infill. No supports needed. 9/9/26 Update V2.1 has been…
A keycap puller for doing keycap puller things >:) if you want a tighter puller you could scale it down just a bit and it might work a bit better 0.4mm nozzle 0.28 layer creality ender 3 v3 se
Based on a nice project by adafruit, I made a really overengineered bike light for my niece and nephew.
Printed in PLA with no special changes to the standard settings.
A keycap puller for doing keycap puller things >:) if you want a tighter puller you could scale it down just a bit and it might work a bit better 0.4mm nozzle 0.28 layer creality ender 3 v3 se
The ASA printed parts I received from Slice Engineering, with the Prusa I3 MK3S+ Mosquito Upgrade kit, are slightly different from the original parts, as designed by WickedTwister. The rectangular opening, just above the heater block,…
This model is pretty self explanatory. Give the side a few taps to force ash to fall down into the infill trap. Increasing infill density will trap the ash better but be harder to shake the ash down into. Must be printed with no top…
Goblin gözlüğü. Orjinal gözlüğümü 3D tarayıcı ile taradım. Kapaklar ve gözler arası kordonu sıfırdan tasarladım. İsmimi anmak istemeyen olursa diye “GOBLINWORKS” yazmayan bir çerçeve de ekledim. PETG, ABS ile yazdırmanızı öneririm ama PLA…
friend of mine thought engineers were unintelligent, and preferred themselves to be called a "designer", causing this as a gift. printed 100% infill for strength, with filament change in-between either side, printed on the designer face…
A small redesign of the engineering meme. Saw the design on the internet, but there you had to pay for the .dxf files, so I thought that I should create my own version for free. You only need 4 some small srews for the wall if you want to…
DESCRIPTION Thank-you to Ryan @V1Engineering for his incredible support, and of course for allowing the use of these logos! This started as a joke. It was around halloween time and I thought it might be cool to project a V1 logo onto my…
Version 1.4 — Stronger, Stiffer, More Stable (Updated from Version 1.2) 🌀 3D Flight Lab Drone Gyroscope – STL Files for DIY Printing, Testing & STEM Projects by Binary Box LLC The 3D Flight Lab Drone Gyroscope just got a major upgrade.…
Why is there yet another Internal spool mod? For one simple reason: This one doesn't require a panel spacer And since the space inside is very limited it uses a latch to hold the spool from the inside, this was tested with elegoo…
Other projects from overengineered ammo box series: https://www.printables.com/@Zimny_4180406/collections/3128956 File names are shared across the entire project family. A part with a given name from one project will fit as a part with…
Print Settings: I printed mine in: PLA 0.15mm layer height 15% infill Notes: I printed the bushings and gears in white PLA, with the first layer speed at 50%. I printed the base in red PLA, with a color change to white for the pegs (just…
Other projects from overengineered ammo box series: https://www.printables.com/@Zimny_4180406/collections/3128956 The video shows a box for a different caliber, but the principle of operation is the same File names are shared across the…
Other projects from overengineered ammo box series: https://www.printables.com/@Zimny_4180406/collections/3128956 The video shows a box for a different caliber, but the principle of operation is the same File names are shared across the…
Other projects from overengineered ammo box series: https://www.printables.com/@Zimny_4180406/collections/3128956 File names are shared across the entire project family. A part with a given name from one project will fit as a part with…
Other projects from overengineered ammo box series: https://www.printables.com/@Zimny_4180406/collections/3128956 File names are shared across the entire project family. A part with a given name from one project will fit as a part with…
This is something I whipped together with Fusion. I am just beginning, and I feel like this is a good imitation of IKEA. You should be there when in makes the first layer, because if the holes fail, it will give you a very bad day...
Monture de remplacement pour Mantis Elite Version 2 Reference fabriquant 202-B0445 Vision Engineering Cette pièce est une substitution au modèle d'origine. Paramètres d’impression 3D : Impression facile avec support (voir images), en PETG…
Warning These files has many parts and take time to load and slice. I have attempted to make it as easy as possible to lay out and print. Options No slider guide Inner slider guide Outer slider guide The engineering squire guide positions…
I got tired of the overused, unpurposed standard pencil holders, so I made my own for my needs - yet fluid for everyone. It takes a few basic standard tools (TI graphing calculator, digital caliper, wallet, pencils) and combines them with…
Prometheus Engineer STL Original Model design not found anywhere else. For either FDM or Resin Printers. Follow me for all my designs!
Introduction to the ruler A ruler is such a basic daily thing that I barely give it a second thought as did I starting this project making a basic ruler to build upon. This is so much harder than I anticipated. OpenScad facilitates a…
The Totally Not Over-Engineered Wall Hook Why use a passive wall hook when you can have a mechanism? No floppy middle state here. A true magnetic bistable latch drives the hook open or closed with a deeply satisfying snap . Smooth,…
This is the first attempt to make an easy 3D printable centre finder tool using the flat 3D printed ruler design. Design Iterations Revision Comment v1 This locking mechanism needs refinement. It's not perfect and needs improvement to…
This model demonstrates different hinge types and gear types and springs and spiral
Add professional realism to your industrial and urban scenes with this Construction Worker / Site Engineer 3D printable model. Featuring a hard hat, high-visibility safety vest, work boots, and rolled blueprint plans, this character…
⚠ Be aware this model has not been printed and tested as complete part yet. ⚠ I reverse-engineered the Delonghi ECP front panel as best and close to the original as i could. The original intention was to then modify it for mounting a…
Two Gridfinity holders for the Engineer SS-03 Solder Sucker . Also will hold the two Silicon tubes included.
SLIM and rounded fader knob I quickly drew up for my new calculator. I printed it with a Bambu lab A1 with the 0.2mm nozzle with 0.1mm layers and 3 perimeters, 15% infill. less probably feasible. fits perfectly without any post…
Trigon Core: Engineered Modular Storage System Trigon Core is a scalable workspace organization system designed with a focus on structural rigidity and industrial design aesthetics. Unlike standard pegboards, this system utilizes a 12mm…
As you can see in the second image, you'll need to tell your slicer to stop and insert four 4x2mm magnets to hold the bits in place. Very simple. I included the STEP file so you can alter the text or reshape it to fit something like…
This Steampunk Alchemist Engineer blends science, invention, and mechanical craftsmanship into a striking steampunk character. Equipped with brass goggles, a mechanical backpack filled with gears, and a large wrench tool, the inventor…
Works if you have two coat rods - STEP file can be edited to change the distance. Lots of holes to configure where the hooks are. I used 8 which gives you 16 hangers. Printed in PETG.
I wanted to upgrade my Lowrider v3 to a Jackpot 3 controller but could not find a case I liked, so here is a remix of one of design8studio' s excellent designs. The three main differences from the original are: It's for the Jackpot3!…
a very simple lid for a regular soda can to let you store your already opened can in the fridge without tasting like mac n' cheese later.
I liked Shiro321's idea but wanted to make some changes so I designed my own version. This design uses an M3 nylon lock nut and a M3x20 socket head cap screw. There are two versions of the clamp. Best bet is to start with the normal…
really good fidget to play with it is noisy. also make sure you super glue the thumb into the socket
This is a quick design of a coffe mug. Print with supports and enjoy your coffee (fast) Print Settings Printer Brand: Raise3D Printer: Pro2 Rafts: No Supports: Yes Resolution: 0.2 Infill: 30 Filament: Raise3D PETG black Notes: Use…
Based on a nice project by adafruit, I made a really overengineered bike light for my niece and nephew.
This is an assortment of items I have used to aid in CAD design. I use this daily let me know what you think ;) The items in the set are as follows (affiliate links for individual products below): Weighted Muji Tape Dispenser base that…
Inspired by Jan Štech and their Template For Electrical Diagrams , I have made a similar design to print for creating consistent Free Body Diagrams, as well as consistent Beams for strengths. Designed to be printed at a .2mm layer height.…
I wanted a heat-set insert press, but couldn't find any that matched my requirements: Used as few “special” hardware bits and bobs as possible. Be as compact as possible. I don't have lots of storage room, so something compact, but easily…
Here i made a over engineered Spool holder for 1 KG spools. I made mine from a steelplate 50mm*125mm*5mm and two 20mm square tubes with a length of 100mm and welded on the steelplate. Give it a nice black coating. With the steelplate and…
To mount your raspberry pi 5 to the Engineering fixture plate as seen below: There are two versions. One with holes for just screwing in m3 screws directly in to plastic, and 1 version to fit CNC Kitchens inserts which has “(insert)” in…
Lattepanda 3 Delta mount for Engineering fixture plate
Honestly at this point it can double as a weapon, not exactly sure where the original is from or where its applied but if its what youre looking for be sure to leave a like.
Please reference the drawing for assembly, if you have any questions please ask and I will be more than happy to assist! Enjoy! Make sure you print 4 x Organic Drawers, all other components only require one piece. For the pencil/pen…
After several iterations of stress testing, I've created a super strong ramp that can be dropped, thrown against the wall, smashed with a barbell, and supports a barbell loaded to 5+ plates per side (495lbs total). In order to support all…
This is a modified version of @AlastairGreen_326352 's KO II Shelf to take magnets. I wanted to be able to mount it on the side of my server rack which is metal. It works great and has more than enough magnets to hold it. I also put some…
I designed a smaller, faster-to-print calibration cube that tests overhangs with its 45-degree overhanging edges. I've also added a version of the cube with no overhangs, if you prefer. 10mm x 10mm x 10mm Enjoy! Please leave a like if you…
Having bought this case I was immediately disappointed by the lack of core functionality. This case in its stock configuration is an oven for your computer components, the GPU is starved for air, as is the CPU. So I designed these…
Requires 2x Multiboard Connectors: https://www.printables.com/model/716558-multiconnect-generic-connector-for-your-multiboard Built in support, print upside down, remove support and use.
A replacement keycap for the teenage engineering EP-133 and EP-1320 sampler.
A couple of Gridfinity modules to hold rulers. Specifically, both normal rulers and 3-sided architectural/engineering rulers. The 1x1 holds one 3-sided and one normal ruler. The 1x2 hold two of each. Both are 3 units tall. I recommend…
An apprentice machinist usually created a classic Turner's cube. This design gives the illusion of a multi-color print where in fact it's an assembled multi-part print that allows the design to be almost seamless. This can be used in aid…
Someone in the Virtual Boy Fans Unite group on facebook said his lenses were cracked. I didnt have any extras to send, so within an hour I'd removed the best original lens I had from one of my two working Virtual Boys, and I reverse…
Simple case to keep the square protected when not in use
This collection of STL and STEP files offers a variety of engineering graphics-related objects, all created through freehand sketching. These files are ideal for those interested in 3D printing models for educational purposes, design…
Attention: I keep seeing people selling my models on Esty and eBay: Digital files and actual prints. PLEASE STOP THAT! I have already gone after a few of them and got them banned. I will pull these off here if this keeps happening. I put…
Remix of Nozzle Torque Wrench & Bit Holder Gridfinity by crealitycheck. Lowered bin height and added nozzle holder(s).
Repair part for FX Carbon steering wheel clutch paddle. PETG print, supports required, layer 0.5-1 mm
I got tired of the constantly scuffed fingers or dropped inbus wrench, so I designed my own slightly overengeneered model of the inbus wrench handle (allankey). The primary goal was to make the handle grip well and also offer reasonable…
So... At first I just wanted to make a simple monopoly with more street groups and started to think about the best way to do it. I spent a long time thinking and planning etc. but then I had the idea of making the whole monopoly modular!…
"Have you tried poking it with a stick?" They ask. "No, I have not tried poking it with a stick" I reply. Not for the lack of thought for doing so, but because I simply do not have a suitable stick. That is of course until now! The…
Needed some small wrench for soft tightening parts in wise, yeah, i could make it simple, but why? This looks better and if i will brake some part of it, i can only print the one broke part. Hope someone will use it as much as me. You…
Custom adjustable holder for Saeshin Strong 210 spindle. Both pieces need support for printing. Nozzle 0.4mm layer 0.2mm Infill 100%. The older version breaks in some situations so I've added an M4x17mm flat head screw and m4 nut to…
A simple design that I made in a while of my time. My idea is to make a more complete rule to help me with the diagrams that I have to make in the subject. I hope it can serve you as well as it did me.
I made a wide version of the heater extension (and some remixes) of the (Un)Original Prusa Drybox. It is largely to help folks add various hardware and have an easier time at wiring. It is also built to optimize for arbitrary extensions.…
This is an elevator for the upper part of your bambulab printer. This piece provides you with different functionalities, advantages and will solve or avoid many problems: The PTFE will enter the extruder more vertically, without curves,…
Something people in engineering class made on Tinker CAD so it should count as learning models. PLEASE LIKE (I'm still tryna get a 3d printer)
I have just moved over to use the excellent Milwaukee Packout Storage system for my hobby/3D printing room. I am using gridfinity within them for both tools and parts storage. I think “Engineer Brand” tools are very good value for money,…
Remote-Controlled Tank Transform your ideas into reality with this advanced remote-controlled tank model. Designed with multiple electronic modules, including a Raspberry Pi and a laser, this tank provides endless possibilities for…
ENGINEER spanner set holder for gridfinity. 3 x 2
. STL file does not contain the text at top of the model, added afterwards in bambu studio.
This is a replica of the goggles worn by the engineer from Team Fortress 2. They are not using the actual model files from the game, but instead I have recreated myself in CAD using image reference. However, I tried to optimize them for…
Stand is 2 models, 5 prints. It utilizes m4 hardware. So you will need M4x6mm flat head screws and I used M4 heat inserts 6mm diameter and 4mm long. You can add rubber bumpers as needed but it has been working fine for me without any.
Storage for Engineer SS-02 desoldering pump along with spare tube. Print with: 2-3 parimeters 2-3 top/bottom layers 0,2mm layer hight 10-15% infill.
The cup model includes a false bottom where weight can be added mid-print to help with stabilization when removing scrap vinyl using the weeding tool. Print Instructions: Pause the print just before the first top layer of the inner…
I have a member of my relatives that works in A.C.E, so I saw fit that he and others got a little something related to that. Printing You can slap this on the slicer immediately, then scale down to 65-70% and you are actually done right…
Minimalist tile organizer for Kraftwagen : Age of Engineering (2024 version) Print settings to maximize speed and minimize filament use: Wall Thickness: 1.2mm Top layers: 0 Bottom layers: 0 Infill: 20% Infill pattern: Zig Zag (or your…
Prints better when it's right side up with a little support on those bridging areas (the details should be fine when left alone). Standard printing setups, tree support works well with it. Works for 100%, but looks better on 200%
Printed in PLA with no special changes to the standard settings.
This is a mount for holding an Engineer SS-02 Solder Sucker on the IKEA Skadis board. It also includes places to store the spare silicone tubes. It uses the IKEA Skådis Secure Clip System Template from mkingery , and a pair of the clips…
EMT Mount for the Gilbert Engineering Fuzion. This is a second version of the Fuzion mount that I have created. It uses the traditional + center mount vs the H design of the other mount. Perimeters are your friend for strength in mounts.…
This are parts for the GE spiral mini tree. It's designed to use 20mm electrical pipes (e.g. https://www.obi.at/leerrohre/isolierrohr-starr-en-20-laenge-2-m/p/1846310 ) I cutted the 2 meter pipe in the following dimensions: > 25 cm for…
