Cable box, reengineering of Ikea Sätting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I reengineered the Ikea Sätiing to my dimensions.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 57
- Makes
- 0
- Views
- 739
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Ikea Sätting cable organiser is practical, but too big for the power strip I am using. Also not high enough for the chargers I have when plugged in the power strip.
So I redesigned the box.
The cover for the side cable inlet can be shortened when you have many incoming cables.
I printed it with PETG for rigidity. Likely PLA will work too.
I glued on some small feet on the bottom so there will be some ventilation.
Just a warning: it might be cheaper to buy the box from Ikea than printing it yourself……. but less fun……
As usual when you:
like the design, give me some likes (my only reward)
print the model, share some pictures and give feedback
have questions, just ask