Cable box, reengineering of Ikea Sätting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I reengineered the Ikea Sätiing to my dimensions.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 739
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Ikea Sätting cable organiser is practical, but too big for the power strip I am using. Also not high enough for the chargers I have when plugged in the power strip.
So I redesigned the box.
The cover for the side cable inlet can be shortened when you have many incoming cables.
I printed it with PETG for rigidity. Likely PLA will work too.
I glued on some small feet on the bottom so there will be some ventilation.
Just a warning: it might be cheaper to buy the box from Ikea than printing it yourself……. but less fun……
As usual when you:
like the design, give me some likes (my only reward)
print the model, share some pictures and give feedback
have questions, just ask