Prusa Core One Raspberry Pi Zero 2w Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A easy and clean way to mount a RPi zero 2w onto a Prusa Core One
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 5
- Makes
- 0
- Views
- 94
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Clean, simple, and purpose-built—this Raspberry Pi Zero 2W mount is designed to bolt directly onto the rear electronics enclosure of the Prusa Core One, giving you a clean way to add OctoEverywhere access without clutter. The mount uses the stock top and middle mounting points on the rear panel, keeping everything aligned and secure. Installation is straightforward: press in 3 heated inserts, then use 3× M3x6 screws for the mount itself, along with 2 of the Prusa-provided M3x8 screws to attach it to the printer. While the Pi typically uses M2.5 hardware, the holes are intentionally opened up for more common M3 fasteners—because nobody likes hunting for oddball screws mid-build.
With normal settings this should be a ~20min print.
Material: Polymaker ABS
Walls: 4
Infill: 20%
Nozzle Temp: 260C
Bed 105C