1 / 4
30 mm handlebar mount for Garmin vivoactive VA3/VA6 — image 1
1 / 4

30 mm handlebar mount for Garmin vivoactive VA3/VA6

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Handlebar mount for Garmin sports watch

Rating
0 / 5
Likes
0
Downloads
9
Makes
0
Views
40
Reviews
0

Updated at source:

Model information

Category
Other Sports
License
Creative Commons — Attribution — Share Alike

30 mm handlebar mount for Garmin vivoctive 3 and 6 models, maybe some others/generic too.

The top is interchangeable for different usecases: strap, no strap, clip on

What you need:

  • Three M3x5 screw inserts

  • Three M3x8 screws for assembly

  • One M3x12 screw for hinge

Inner diameter of the handlebar part is 32 mm, you can fit little rubber bit on the inside for extra grip and less load for the plastic. I'm using slice of old inner tube.

Printed with tree supports, no brim, 3 walls, gyroid infill. Printing parts in the orientation shown in the slicer image provides best physical strength.

Use thread locker on the screws to avoid vibration related problems.

As print material I would recommend ABS, PETG, HT-PLA or PLA in that order.

Designed with Plasticity CAD

Tags