Smart upgrade for analog boiler with Raspberry Pi Zero 2 WH
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Heats your warm water when electricity is cheap, replacing the analog knob with a Raspberry Pi Zero controlled RC-servo
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
This is version 2 of my RC for an analog boiler. I wanted the Pi4 from the first version for more advanced applications so i used this time a Raspberry Pi Zero 2 WH (with WIFI) and constructed an enclosed encasement with a mount and a Micro-USB (USB-B) outlet.
UPDATE: 1.Nov.2026: The new version comes with a lower temperature from Sunday to Friday and a higher temperature on saturday for legionella-protection once a week. It is written in micro python. When you use it you have to enter your SSID and PW for your Wifi instead of the asterisks. Change the start time to when you have cheap electricity (15h is 3p.m.) and choose how many hours it will be heating (default is 3). I choose Saturday for higher temperature as the family likes to take a bath sometimes. The higher temperature comes with 12.5ms, the lower with 10ms, off is 2.5ms. (It should be labelled % instead ms, is historical labelled)
The Raspberry Zero2 doesn't have a SSH possibility so the script gets the time through WIFI. Load it with Thonny or any other script-editor. Then rename the file as main.py and store it on the Raspberry Zero2. If it starts correctly the LED blinks when connecting to the WIFI and then indicates if it’s on or off. I didn’ t want to fiddle with the grid so this is just a smart replacement for the knob.
If you want to change time for summer/winter then just plug it off and on again. Sometimes it needs two starts (as you can see on the blinking LED) because it’s not logged off correctly from the WIFI then.
Part list:
Raspberry Pi Zero2 W (H), Micro USB cabel, power plug with USB
Standard Servo covering 180° rotation
Pin 38 is Ground, Pin 36 is Plus 3,3V, Pin 20 (aka GPIO 15) is data.
The case-lid has to be printed with no top layers, no bottom layers and hexagonal infill to get the grid.
Happy Printing!