40.5mm - lens hood cover / anti-glare cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
40.5mm Lens Hood Cover for Sony E PZ 16-50mm f/3.5-5.6 OSS Lens
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 71
- Makes
- 0
- Views
- 381
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
Happy printing
If you like what I do, you can Buymeacoffee
40.5mm Lens Hood Cover for Sony E PZ 16-50mm f/3.5-5.6 OSS Lens
This 3D model is designed as a lens hood cover / anti-glare cover for the Sony E PZ 16-50mm f/3.5-5.6 OSS lens with a 40.5 mm front diameter.
The model is designed to be printed in two parts. Before printing, you need to use the Split Object / Split to Parts option in your slicer to separate the model into two individual pieces. After printing, both parts should be assembled and glued together using super glue / CA glue.
Important mounting note
The lower part of the model does not have a traditional thread. Instead, it has fine internal ribs that allow the cover to be:
gently pressed onto the lens,
or carefully twisted/screwed on during installation.
Since the original 40.5 mm thread on the lens is very fine, this design works well even without a real printed thread. The ribs create enough friction for the part to stay securely attached to the lens, without the need for a very small and difficult-to-print thread.
Printing recommendation
It is recommended to print the model with a finer layer height, such as 0.12 mm or 0.16 mm, to achieve better precision for the internal ribs and connecting surfaces. After printing, check the fit on the lens and, if necessary, lightly sand the inner edge.
Note
Do not use excessive force during installation. The part should fit onto the lens with light pressure. If it feels too tight, lightly sanding the internal ribs is recommended.
Happy printing
If you like what I do, you can Buymeacoffee