1 / 5
40.5mm - lens hood cover / anti-glare cover — zdjęcie 1
1 / 5

40.5mm - lens hood cover / anti-glare cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

40.5mm Lens Hood Cover for Sony E PZ 16-50mm f/3.5-5.6 OSS Lens

Ocena
0 / 5
Polubienia
29
Pobrania
71
Wydruki
0
Wyświetlenia
381
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

sprintech.net

Happy printing

If you like what I do, you can Buymeacoffee

40.5mm Lens Hood Cover for Sony E PZ 16-50mm f/3.5-5.6 OSS Lens

This 3D model is designed as a lens hood cover / anti-glare cover for the Sony E PZ 16-50mm f/3.5-5.6 OSS lens with a 40.5 mm front diameter.

The model is designed to be printed in two parts. Before printing, you need to use the Split Object / Split to Parts option in your slicer to separate the model into two individual pieces. After printing, both parts should be assembled and glued together using super glue / CA glue.

Important mounting note

The lower part of the model does not have a traditional thread. Instead, it has fine internal ribs that allow the cover to be:

  • gently pressed onto the lens,

  • or carefully twisted/screwed on during installation.

Since the original 40.5 mm thread on the lens is very fine, this design works well even without a real printed thread. The ribs create enough friction for the part to stay securely attached to the lens, without the need for a very small and difficult-to-print thread.

Printing recommendation

It is recommended to print the model with a finer layer height, such as 0.12 mm or 0.16 mm, to achieve better precision for the internal ribs and connecting surfaces. After printing, check the fit on the lens and, if necessary, lightly sand the inner edge.

Note

Do not use excessive force during installation. The part should fit onto the lens with light pressure. If it feels too tight, lightly sanding the internal ribs is recommended.

sprintech.net

Happy printing

If you like what I do, you can Buymeacoffee

Tagi