eBike rack mounting post for wireless turn signals
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Make your turn signals visible on an ebike with a rear rack
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
I bought some cheap wireless turn signals on AliExpress for my Lectric XPress 750 ebike, but it didn't have appropriate mounting hardware to make them visible. So I made this adapter that you can screw to the back rack and attach the signals using the seat post mount instead.
The .stl is sized for the Lectric's rear rack (80mm spacing between the mounting screws) but I've included the OpenSCAD source which should be easy to modify to whatever spacing you need. You can also adjust the angle of the post if you want something other than the standard 15°.
I printed in Bambu PA-CF which is definitely overkill. PETG, ASA, and ABS are all probably good choices.