Ergonomic Handle for Crochet Hook (Press-Fit)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here are the title, summary, and description drafts for your crochet hook handle. This is a fantastic, practical print
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Description
The Problem Working with thin, bare metal crochet hooks for long periods can cause hand cramping and fatigue.
The Solution I designed this custom, low-profile handle to add some ergonomic thickness to a standard 3mm crochet hook.
Assembly Note: The "Tight Fit" I designed the internal hole tolerance to be extremely snug. You will need to push the hook in with a little bit of force. * This is intentional! The tight friction fit ensures the hook won't twist or pull out while you are working with tight yarn tension.
Tip: If you are having trouble pushing it all the way in, you can gently heat the metal hook with a hairdryer or warm water before inserting it, which will soften the plastic just enough to slide in perfectly.
Print Settings
Because this relies on a tight internal tolerance, make sure your printer is well-calibrated for dimensional accuracy.
Layer Height: 0.12 mm or 0.16 mm (Lower layer heights help create a smoother internal cylinder for the hook to slide into).
Infill: 15% - 20%
Wall/Perimeter Count: 3 to 4 walls (Highly recommended so the handle doesn't split when you force the metal hook inside).
Orientation: Print vertically (standing tall on the flat bottom).
Supports: No supports required.
Brim: Recommended. Since it is a tall, thin part, a brim will help keep it stuck to the build plate during the final layers.