Ergonomic Handle for Crochet Hook (Press-Fit)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here are the title, summary, and description drafts for your crochet hook handle. This is a fantastic, practical print
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Description
The Problem Working with thin, bare metal crochet hooks for long periods can cause hand cramping and fatigue.
The Solution I designed this custom, low-profile handle to add some ergonomic thickness to a standard 3mm crochet hook.
Assembly Note: The "Tight Fit" I designed the internal hole tolerance to be extremely snug. You will need to push the hook in with a little bit of force. * This is intentional! The tight friction fit ensures the hook won't twist or pull out while you are working with tight yarn tension.
Tip: If you are having trouble pushing it all the way in, you can gently heat the metal hook with a hairdryer or warm water before inserting it, which will soften the plastic just enough to slide in perfectly.
Print Settings
Because this relies on a tight internal tolerance, make sure your printer is well-calibrated for dimensional accuracy.
Layer Height: 0.12 mm or 0.16 mm (Lower layer heights help create a smoother internal cylinder for the hook to slide into).
Infill: 15% - 20%
Wall/Perimeter Count: 3 to 4 walls (Highly recommended so the handle doesn't split when you force the metal hook inside).
Orientation: Print vertically (standing tall on the flat bottom).
Supports: No supports required.
Brim: Recommended. Since it is a tall, thin part, a brim will help keep it stuck to the build plate during the final layers.