Case for Aukey USB-C Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for Aukey USB-C Adapter This case holds 2 Aukey USB-C to USB 3.0 (USB-A) adapters. It is designed to have a 6 x 3…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 13
- Makes
- 0
- Views
- 145
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Case for Aukey USB-C Adapter
This case holds 2 Aukey USB-C to USB 3.0 (USB-A) adapters. It is designed to have a 6 x 3 mm magnet embedded in each the box and the lid to hold them together.
To embed the magnets, I used GCode Simulator to find the height of the first layer above the hole for the magnet, then I inserted command M600 to pause the printer. When I added the magnet it wanted to lift out of place and stick to the gantry of my printer when I resumed printing, so I glued it in place with a drop of super glue before resuming. When placing the magnets, be sure to orient them so that the lid and box are attracted to each other when assembled.
Links
Aukey USB-C to USB 3.0 (USB-A) Adapter 6 x 3 mm magnet GCode Simulator
Print Settings
Printer:
Monoprice Select Mini
Rafts:
No
Supports:
No
Resolution:
0.0875
Infill:
20%
Notes:
The two boxes pictured were made with Hatchbox Wood PLA and Hatchbox Blue PLA.
Category: Electronics