0.25-20_Ball_and_Socket_CameraMount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Camera mount option for the Ball and Socket remix from @ORDEEP.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 4
- Makes
- 0
- Views
- 48
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
Instead of the 2020 Extrusion mount in the remix by @ORDEEP, I substituted a 02.5-20 threaded stud, like those used on camera mounts. This allowed me to then mount a Raspberry Pi Zero 2W (mounted in the Raspberry Pi Zero W Case w/Camera on Thingiverse) in my IKEA Lack Enclosure.
I had to crank down pretty hard on the knob to get the Pi to stay in place, but that's not too surprising given that it's holding the Pi in a horizontal position. A little tweaking of the nut size might make it easier, but I haven't tried that yet since it's working as is.
Printed in Overture PETG, 2.0mm STRUCTURAL, 15% fill.