V-Core 3 Panel Feature Templates and Extractor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An SCAD generator and STL files of the features to cut on V-Core 3 panels, to be used with a flush trim bit on a router
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 30
- Makes
- 0
- Views
- 470
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
Github repo: https://github.com/QQuark/v-core-3-template-extractor
What this is
An OpenSCAD file allowing to extract areas of the panels of the V-Core 3 enclosure, to be for example 3d printed as router templates.
The result is provided in the output dir for convenience.
Some of the templates are redundant or almost-redundant, it is up to you to decide which ones you actually need by comparing them.
Template locations
provided in template-locations.png
How to use the SCAD file
- Drop inside the directory of the DXF files
- Verify that with the default .scad file provided the extractions shown in openscad are in the correct locations
- Comment the last line (call to "select")
- Execute the extraction with make_stl.py, provided [*here*](https://github.com/QQuark/make_stl)
``` make_stl.py v-core-3-500-panel-templates.scad ```
Features
- Allows always matching the latest DXFs
- Prevents human error by automating the act of transposing DXF measurements to the 3d models
- Uses a (slightly clunky) quadrant system to indicate the overall location of each extraction
- Auto-rotates text when on a side quadrant
Possible improvements
- Visually indicate the quadrant, and the panel edges for alignment.
- Check that this is compatible with the 300 and 400 version
License
Script is GPLv3 (https://www.gnu.org/licenses/gpl-3.0.en.html)
STL Files are whatever is compatible with the original licenses of the DXF files from RatRig