V-Core 3 Panel Feature Templates and Extractor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An SCAD generator and STL files of the features to cut on V-Core 3 panels, to be used with a flush trim bit on a router
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 470
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Github repo: https://github.com/QQuark/v-core-3-template-extractor
What this is
An OpenSCAD file allowing to extract areas of the panels of the V-Core 3 enclosure, to be for example 3d printed as router templates.
The result is provided in the output dir for convenience.
Some of the templates are redundant or almost-redundant, it is up to you to decide which ones you actually need by comparing them.
Template locations
provided in template-locations.png
How to use the SCAD file
- Drop inside the directory of the DXF files
- Verify that with the default .scad file provided the extractions shown in openscad are in the correct locations
- Comment the last line (call to "select")
- Execute the extraction with make_stl.py, provided [*here*](https://github.com/QQuark/make_stl)
``` make_stl.py v-core-3-500-panel-templates.scad ```
Features
- Allows always matching the latest DXFs
- Prevents human error by automating the act of transposing DXF measurements to the 3d models
- Uses a (slightly clunky) quadrant system to indicate the overall location of each extraction
- Auto-rotates text when on a side quadrant
Possible improvements
- Visually indicate the quadrant, and the panel edges for alignment.
- Check that this is compatible with the 300 and 400 version
License
Script is GPLv3 (https://www.gnu.org/licenses/gpl-3.0.en.html)
STL Files are whatever is compatible with the original licenses of the DXF files from RatRig