1 / 3
Protective hard case for Nikon 1 J5 w/ 10-30mmPD — image 1
1 / 3

Protective hard case for Nikon 1 J5 w/ 10-30mmPD

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I made a hard case to protect my camera stored in the bottom of backpack. Camera : Nikon 1 J5 Lens : 1 Nikkor VR…

Rating
0 / 5
Likes
3
Downloads
9
Makes
0
Views
284
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I made a hard case to protect my camera stored in the bottom of backpack.

Camera : Nikon 1 J5

Lens : 1 Nikkor VR 10-30mm PD-ZOOM

Print Settings

Printer Brand:

Anycubic

Printer:

All-metal Mega

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.2mm

Infill:

12%

Filament: SUNLU PLA Video =====

Prepare a wire with thickness around 1.5mm. Please make sure that is straight.

Finish the holes with a drill, then insert the wire. To fix the wire, bend the end of that slightly.

You can stick urethane foam (thickness should be less than 2mm) as shown above.

Category: Camera

Tags