3U 6x 3.5" SATA hdd cage for 10" rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
10" rack cage for 6x 3.5" SATA hdd mounted vertically in hot swap sleds (Dell model)
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 78
- Makes
- 0
- Views
- 562
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
3U cage for 6x SATA 3.5" hdd mounted vertically using sleds (dell style) for a 10" rack.
I've designed the bay's for this model of sled
( https://www.amazon.se/dp/B07929WYSR?ref=ppx_yo2ov_dt_b_fed_asin_title ).
You will probably have to make some sort of rest for the back-end of the cage, as the weight of up till 6 hdd might make the cage droop... On my version of rack, the length of the cage will reach the lower crossbar for support if the cage is mounted in the lower position.
Each bay needs a SATA male to female hot swap connector attached with 2x M3x12mm machine screw and nut.
Print time on a Creality K2 plus is about 26h, using PETG on a 0.4 nozzle at 0.2 layer height with 2 walls and 10% cubic infill. You will need support on the raised mounting holes on the back of the tray.