DX-88 Hy-Gain Antenna Mast Support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the support that holds the HGN-DX-88 Hy-Gain Radio antenna mast in place with the base.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This Support is for the DX-88 (HGN-DX-88) Hy-Gain Antenna. Should fit same as original part.
Print with flanges horizontally and at highest point from build plate.
I recommend printing in ASA 60% triangular infill.
I used a Prusa mini + for this. Supports are Required, but only from build plate.I used organic to make them easy to remove, and i don't care what the underside looks like since it gets bolted down.
I made this at the request of someone who used my DX-88 base model using SolidWorks.
I will provide a step file on request.