DX-88 Hy-Gain Antenna Mast Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the support that holds the HGN-DX-88 Hy-Gain Radio antenna mast in place with the base.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Support is for the DX-88 (HGN-DX-88) Hy-Gain Antenna. Should fit same as original part.
Print with flanges horizontally and at highest point from build plate.
I recommend printing in ASA 60% triangular infill.
I used a Prusa mini + for this. Supports are Required, but only from build plate.I used organic to make them easy to remove, and i don't care what the underside looks like since it gets bolted down.
I made this at the request of someone who used my DX-88 base model using SolidWorks.
I will provide a step file on request.