Airsoft Picatinny Riser (With Recoil Lugs)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Picatinny riser with recoil lugs and a clamping mechanism to hold it firmly to the picatinny rail.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 118
- Makes
- 0
- Views
- 397
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
Dot height is lifted 13.35mm (0.526in). There were no picatinny risers that I could find online that had the features I wanted in a printable picatinny riser, looked cool, and were also free. This picatinny riser (both the small and large versions) have recoil lugs (useful for airsoft gas blowback rifles) as well as a special clamp design that will clamp the picatinny riser to the rail and hold it tight. This is achieved through a small ridge on the clamp that will press the riser downward, ensuring no wobble of the optic during the cycling of whatever you mount this on. Some post - processing will probably need to be done on the recoil lugs for proper fitment. The following parts are required for assembly:
2x M4 button head cap screws, 30mm in length
2x M4 nuts
Notes:
The recoil lugs need to be supported from the very bottom. I included print files with custom support added, however I found that tree support also works well.
The risers and clamps should print with the large 45 - degree angled portion on the bed.
The M4 screws can be slightly cut down to fit the mount better but I haven't found this to be necessary.
This riser has been tested on my Tokyo Marui MWS and has held up excellently.
Printed with Fusion Filaments HTPLA+.