USB-C Powered Banker's Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I enjoyed wiring and painting it, hope you do as well!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Important: Before printing please make sure:
Add extra walls. Print with at least 4 walls. There are a few spots (especially in bottom part of the base) that are very thin. The arm of the base is hollow inside for wiring. I suggest cut the arm from the base to print with 3 walls and print the base with 4 or maybe 5 walls.
I printed the shader with the hollow part on the bed and supports inside it. Also print with at least 4 walls.
The arm on the lamp base is hollow for wiring. I used a pair of 30AWG wires and a couple of 0805 SMD LEDs, paired with a 100Ω resistor connected to the positive pole of a male USB-C jack, to light up the lamp.