USB-C Powered Banker's Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I enjoyed wiring and painting it, hope you do as well!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Important: Before printing please make sure:
Add extra walls. Print with at least 4 walls. There are a few spots (especially in bottom part of the base) that are very thin. The arm of the base is hollow inside for wiring. I suggest cut the arm from the base to print with 3 walls and print the base with 4 or maybe 5 walls.
I printed the shader with the hollow part on the bed and supports inside it. Also print with at least 4 walls.
The arm on the lamp base is hollow for wiring. I used a pair of 30AWG wires and a couple of 0805 SMD LEDs, paired with a 100Ω resistor connected to the positive pole of a male USB-C jack, to light up the lamp.