1 / 4
Bike Stem Workstand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds the stem and handlebar while you're taking the fork off
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 107
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Saw this pop up on aliexpress a while ago and then looked for a model to print myself instead of buying a 3D printed part, but they all cost money. So I just quickly made my own instead.
For 28.6 / 1 1/8" stems, the base is printed on its side with the angled part on the part tray at the top (orca slicer auto-orients it this way for me), and the steerer tube part is printed standing up. Attach the steerer tube part with an M5 x 16-20mm bolt and a nut. Then strap it to your bike with a velcro strap, zip tie etc.