Spare Mounting Insert
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.15 – €0.18 net (excluding VAT)
For file: Spare Mounting Insert_0.15mm_PLA_MK3S_13m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.17 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 13.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Spare mounting insert for all models of keyholders from Fujfuj.com.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Standard Digital File License
Spare Mounting Insert
Replacement mounting insert designed as a spare part for cases where the original insert is lost or broken. Best for screws of ⌀ 3 - 3,5.
The part can be glued into place using cyanoacrylate glue (super glue), wood glue, Mammut or any similar glue.
Recommended print settings
Material: PLA
Layer height: 0.15 mm
Infill: 100%
Orientation: Keyhole facing up
Supports: Not required
Brim: Optional
If you find the model useful, feel free to share your make or leave feedback.