1 / 3
Power supply cable organizer for pedal boards — image 1
1 / 3

Power supply cable organizer for pedal boards

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Power supply cable organizer for pedal boards

Rating
0 / 5
Likes
7
Downloads
21
Makes
0
Views
106
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Designed for players frequently re-organizing their signal chain.
Can be used to route the power cables where they need to go and hold the extra slack in place.
Snug fit - the cables are held in a tight grip, will not fall out due to shaking or vibration.
For best results, put the cable into the top of the holder by spreading the 'lips' with your fingers, and then push the cable down using a guitar pick.
Length = 50 mm
Width = 20 mm
Height = 20 mm
Recommended clearance between the floor and the bottom of the underside of the board = 25mm or more
Designed to be mounted using two M3 x 16 wood screws. If your board is made of metal, use some good double-sided tape instead.

Tags