Print in place car toy
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.88 – €5.96 net (excluding VAT)
For file: SpielzeugAuto_V1.3.0_0.6n_0.2mm_PLA_MK3S_5h10m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.42 excluding VAT (range midpoint).
- Weight reported by the author
- 73 g
- Print time reported by the author
- 5.17 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Print in place car to play with.
- Rating
- 4.8 / 5
- Likes
- 59
- Downloads
- 442
- Makes
- 6
- Views
- 1,717
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution
I was inspired by my make of https://www.printables.com/model/120102 . But I wanted something bigger. Therefore, I created my own, bigger model. Clearance for the wheel 0,4mm to each side. Lube the axis a little bit with some kitchen oil to let the toy roll better.
The model will need a little bit of support. Be careful, so you don't trap the wheel in supports. See 3mf file or print pictures.
Length: ~13cm
Widht: ~6cm
Height: ~6cm