1 / 8
Lamello Classic X to osVAC neo M25 - Vacuum Adapter — image 1
1 / 8

Lamello Classic X to osVAC neo M25 - Vacuum Adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Vacuum adapter for Lamello Classic X/Top 10, replacing the 36 mm suction stub for osVAC neo M25.

Rating
0 / 5
Likes
2
Downloads
17
Makes
0
Views
77
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

This vacuum adapter for the Lamello Classic X — and likely also compatible with the Lamello Top 10 — replaces the original 36 mm suction stub. It allows the machine to be connected to the osVAC neo M25 system.

Compatibility has been tested with a Lamello Classic X, model year 2026.

To replace the original suction stub, loosen the screw at the rear of the baseplate, as described under “Changing the cutter” in the user manual. Then slide the baseplate slightly forward, as shown in the photo.

The adapter slides smoothly into the holder while still fitting securely and firmly.

With the new dust extraction adapter installed, the Lamello still fits in the Systainer tray as usual.

The osVAC neo M25 connector design is part of the osVAC neo system by: https://osvacneo.de

Tags