16 models
Printed in two halves, because of the large size. No support needed. Connected by 2.5x8mm cylindrical pins and/or glue. There is a small gap when the box is closed. To make sure no parts escape from the organizer when the box gets tilted,…
Voici un adaptateur entre une lamelleuse Makita Pj7000j et un aspirateur de chantier karcher WD3. V1 Imprimé en 4h en PETG avec support pour l'intérieur et les écritures sur le coté. V2 sans les écritures, impression non testée. PS:…
You'll need M3x10 screws or something similar. I used some screws for plastic that are 3.1x10. Both pieces are printed in PETG and glued together. I used a 0.6mm nozzle and around 5-6 perimeters with a 50% infill.
You'll need some M5x16 hexagon head screws. The rest is printed. I used ASA for the small parts and PETG CF for the stop square
Just a quick adapter to use with a standard festool hose. Works perfectly fine and has a snug fit. Category: DIY
This adapter just substitutes the original hose connection of the Lamello Zeta P2, so you can use the BOSCH click and clean hose. I printed it in ASA Prusament with 4 outer perimeters, 0.4mm nozzle, 0.2mm structural profile. Printing…
I designed this adaptor for an old Lamello milling machine. The old connector for dust extraction was broken and needed to be replaced. Therefore I took the dimensions with a caliper from the machines exhaust. This is the second Version…
Scribing system for Lamello Zeta P2. Inspired by Keith Johnson, please support him and his channel. https://www.keithjohnsoncww.com/shop/lamello-scribe-fence 20mm offset to make an offset row for biscuits For the magnetic scribing block,…
Use yor left over Filament and make flat dowel's for your Lamello Router. Use sequential printing.
The original inlay of the Bosch GFF 22A gives basically no space to neatly add some biscuits. In this version, the recess part for the tool of the original inlay is cut out and the remaining space can be filled with boxes for the three…
Lamello stellt unter anderem Flachverbinder her. Einer davon benötigt eine Bohrschablone.
Here are some models for making drilling / milling for Lamello Cabineo 8, 8 M6 and 12. What you need: Copying ring D27mm Groove cutter D15mm Festool MFS 400 or MFS 700 There are 5 models: Drilling jig Milling jig 16.7 (flush with the…
Der Absaugadapter ist passend für die originalen Baier Absaugschläuche. Mit dem Adapter lässt sich einfach eine Lammello DX200 Fräse absaugen. Evtl. muss die Größe je nach Filament +/- 1-2 % angepasst werden.
This is an adapter for an older ELU DS 140 biscuit joiner. The hose connection fits a Bosch workshop vacuum cleaner. I am including the STEP file for the machine side only so that you can combine it with your own vacuum hose connections.…
This vacuum adapter for the Lamello Classic X — and likely also compatible with the Lamello Top 10 — replaces the original 36 mm suction stub. It allows the machine to be connected to the osVAC neo M25 system. Compatibility has been…
