Raspberry Pi single‑board computer with a 2.5" SATA SSD in a single compact stack
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.53 – €0.65 net (excluding VAT)
For file: 2.5inch drive rpi case bottom mount_0.4n_0.25mm_PETG_MK4S_27m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.59 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 27 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Raspberry Pi single‑board computer with a 2.5" SATA SSD (or HDD) in a single compact stack
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 22
- Makes
- 1
- Views
- 175
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
A 3D-printable bottom mounting plate that pairs a Raspberry Pi single‑board computer with a 2.5" SATA SSD (or HDD) in a single compact stack. The SSD bolts to the underside of the plate, the Pi sits on standoffs on the top side, and the large central cut-out keeps the drive's body exposed for airflow while saving plastic and print time.
What it is
This is the bottom layer of a sandwich-style case — not a closed enclosure. It's a flat, open-frame bracket designed to print quickly with no supports.
Open central window — Reduces print weight, leaves the drive's top face visible, and lets heat escape from the Pi above.
Countersunk corner holes — Four screws come up from underneath to fasten the 2.5" drive and/or join to a top cover.
Integrated Pi mounting bosses — Four raised standoffs flank the central window so the Pi sits flat without separate brass standoffs.
Cable pass‑throughs — Two small slots near the long edges route power, USB, or SATA-to-USB adapter cables cleanly between the two boards.