Pixel 4 Cases - For both hard and flexible filaments
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
New phone, new case designs! I've included four designs: Two flexible designs, one solid and one with a hex pattern,…
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 166
- Makes
- 3
- Views
- 496
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
New phone, new case designs!
I've included four designs: Two flexible designs, one solid and one with a hex pattern, and two rigid designs. The rigid versions are designed for a secure snap fit around the corners, while still being relatively easy to remove. The flexible designs holds all around the perimeter of the phone for a better grip.
The case shell is 1.2mm thick.
I've included STL, SLDPRT (SolidWorks) and STEP files of the design, at least one of which should be compatible with most CAD software for editing.
Print Settings
Printer:
FolgerTech 2020 Prusia i3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Notes:
I printed the flexible design in black Alchement TPU (flexible) filament at 220C, and the bed with painter's tape at 60C. Printed at 100% scale, but shrinkage may vary from printer to printer and material to material, so please comment with any other settings that work.
The rigid design I attempted in White [eSun](https://www.amazon.com/s?k=esun+filament&linkCode=ll2&tag=thingiverse09-20&linkId=ee95e18399f58ca8cf2c8c2b4b912c0c&language=en_US&ref_=as_li_ss_tl) PETg at 230C with the same bed. Although it snapped onto the phone snugly, the low print temperature allowed for some undesirable warping. I'd recommend a better bed treatment and a higher print temperature to help counteract any warping.This should be printed flat on its back for best results.
The case thickness is 1.2mm, so a .4mm nozzle works best.
Category: Mobile Phone