1 / 5
Sunflower Pen Cup — Petal Crown + Gothic Quatrefoil Body — image 1
1 / 5

Sunflower Pen Cup — Petal Crown + Gothic Quatrefoil Body

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Tall pen / marker cup with an 18-petal sunflower crown at the rim and a brick-grid of gothic quatrefoils…

Rating
0 / 5
Likes
3
Downloads
4
Makes
0
Views
31
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution

Tall sunflower-themed pen / marker / brush cup. Two design notes make it more than a plain cylinder:

  • Petal crown at the rim — 18 stretched-ellipsoid petals splay outward from the top of the wall. From the side the silhouette reads as a sunflower head; from above as a sun. Petals merge at their bases (no gappy gear-tooth look) and lean outward so the inside of the cup stays straight-walled.

  • Gothic quatrefoil grid engraved 0.8 mm deep into the body — 14 columns × 4 rows of cathedral-rose four-lobed motifs in a brick-staggered pattern. Catches accent paint or a wash nicely if you want to highlight the pattern.

Dimensions:

  • 90 mm outer diameter, 100 mm tall.

  • 2.6 mm wall, 3.0 mm floor — heavy enough not to tip when full of pens.

  • Petal tips extend ~9 mm above the rim — total height with crown ~109 mm.

Print profile (Bambu Lab P2S, PLA, 0.4 mm nozzle, 0.2 mm layer):

  • Flat bottom on the bed, NO supports.

  • Petals' lower hemispheres are ~30° overhangs (designed this way on purpose) — print cleanly without supports on any modern FDM.

  • 3 perimeters, 15 % gyroid infill, no brim.

  • ~6-7 h, ~85 g PLA depending on slicer settings.

Source .scad included — every dimension is a top-of-file parameter:

  • outer_r, height, wall_t, floor_t — envelope.

  • petal_n, petal_W_tangent, petal_Z_vertical, petal_tip_x_out — crown shape (fewer/wider petals, taller, more splay).

  • qf_rows, qf_cols, qf_lobe_r, qf_engrave_d — quatrefoil density and depth.

Render variants from the bundled source with:

openscad -o sunflower_pen_cup.stl sunflower_pen_cup.scad

Single-colour print as shipped. For a two-tone look (gold petals on a darker body) you can split the crown out by editing the .scad — the crown() and body_with_quatrefoils() modules are already separate, just emit each to its own STL and assemble in Bambu Studio.

Tags