1 / 4
OpenThreadBorderRouter Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compatible with standard OTBR (ESP32) devices without an Ethernet port.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I created this simple case for standard OTBR (ESP32) devices.
The lid stays in place because it’s slightly larger than the inner dimensions, creating a light press fit.
The OTBR itself is also held in place by a slight pressure against the enclosure, keeping it securely seated.
Print settings:
Material: PLA
Nozzle: 0.40 mm
Layer height: 0.20 mm
Since the rubber feet on OTBR devices are not always positioned consistently, there are no exact cutouts on the bottom. However, the openings should be large enough to fit most variants.