Opel Keyfob Buttons Fix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The buttons from my Opel keyfob broke, so I made this replacement using TPU + PLA for the inserts.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 34
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
Instructions:
Remove all remaining rubber from the keypad and clean it as much as possible, until it is like in the second photo.
Print the body (
opel_keyfob_body.stl) in soft TPU. You can use two colors to better highlight each key function.Print the inserts (
opel_keyfob_inserts.stl) in a hard material like PLA.Place the two inserts inside the holes on the back of the body. These need to be made using a hard material to ease pressing on the keyfob switches soldered to the PCB.
Glue the body to the keyfob. I used two sided adhesive tape of the same type used to glue phone screens.
Enjoy!