Monarch Crown Token (MTG) — 3-Colour Heraldic Crown, OpenSCAD
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Heraldic crown token for the Monarch mechanic in Magic: The Gathering.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 25
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
Monarch Crown Token — Magic: The Gathering
A heraldic 3-colour crown token for the Monarch mechanic in Magic: The Gathering. Pass it around like a crown — because it is one.
Look
Bell-shaped band with a tangent-continuous slow-cylinder profile
7 tall triangular spikes alternating with 7 short crenel spikes
Ø5 mm metallic-look orb finials sit on each tall spike's tip
"MONARCH" wraps around the band as inset 2-colour text (Bambu AMS)
Dimensions
Outer Ø: ~46 mm at the disc base, tapering to ~38 mm at the spike ring
Total height: ~22 mm
Wall thickness: 1.6 mm
Spike heights: 7 mm (tall), 4 mm (short)
What's in the bundle
monarch_token.stl — the FULL assembled crown as a single binary STL (body + raised MONARCH letters + orbs in their print-ready positions). ~19 MB.
Multi-colour workflow (Bambu / PrusaSlicer / any modern slicer): import the STL → right-click → Split to Objects (or "Split into parts" depending on slicer naming). The geometry naturally splits into 3 disconnected groups — the body shell, the raised letters, and the orb cluster. Assign each group to a filament slot. Print with AMS / MMU.
Single-colour workflow: just import and print as-is.
Layer height: 0.16 - 0.2 mm.
Walls: 3.
Infill: 15 - 20 %.
Supports: NONE — bell band has only gentle outward flare; spikes taper from wide base to a narrow apex; orbs sit on the spike tips with most of the sphere above the apex line (no overhang).
Orientation: flat on the bed, disc-side down.
monarch_token.stlis already oriented correctly.Print time: ~1.5 h on Bambu A1 / X1C at 0.2 mm.
Colour suggestions
Gold body + magenta orbs + dark purple inlay (classic regal — what the title photo shows)
Silver body + sapphire-blue orbs + black inlay (icy throne)
Matte black body + gold orbs + red inlay (gothic)
White body + pastel pink orbs + gold inlay (ceremonial)
License
CC BY — print one for every play group, gift one to your favourite Commander, share what you make.
