Shift collar bushings for Swift Sport (ZC33S)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replaces OEM rubber bushings for more solid feel gear selector feel Same design as aluminium kits available for sale.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 30
- Makes
- 0
- Views
- 161
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
These are the equivalents of the aluminium sets you see for sale such as https://www.rhdjapan.com/tm-square-shift-collar-set-swift-sport-zc33s.html
These improve overall gear feel and make it feel more positive/clicky.
Plastic may not be as solid as aluminium but it's still a marked improvement on the soft rubber ones, especially when using a strong filament with 100% infill.
Installation
You will need to refer to the respective instructions for the other kits or service manual if available
Print Settings
Material: ABS, ASA etc. - Something very rigid and that can handle high temps (especially for the external ones)
Infill: 100% - It needs to be quite solid and they are relatively small so not much filament used
Layer-height: 0.24 is probably fine, smaller might give you more strength?
Supports: None
NOTE:
I have not tested the internal gear selector bushings as I had aluminium ones on hand - but they were used as a reference and should work
I have however used the external bracket ones in ASA for well over a year with no issue.